ARTISAN COMPETITION
Evergreen Rods, Freshwater Rods
Pay in installments, pay later, financing, pay now
More information
If you are a Plus Fishing Member you'll earn 1237 points.
More info about Point Program
| Field | Fresh water |
|---|---|
| Tecnich | Area Trout, Native Trout |
| Predator | Trout |
| Model | Length | Piece | Weight | Lure Weight | Line(lb) | Power | Type | Other | Material used |
|---|---|---|---|---|---|---|---|---|---|
| ATS-61UL/R | 6'1"(1.85m) | 2 | 72g | 0.3～1.5g | MF 0.2～0.4 | Ultra Light | Spinning | - | Carbon fiber 94% Glass fiber 6% |
| AATS-61L/RF | 6'1"(1.85m) | 2 | 73g | 1～3g | MF 0.25～0.5／PE 0.2～0.4 | Light | Spinning | - | Carbon fiber 94% Glass fiber 6% |
| AATS-61ML/S | 6'1"(1.85m) | 2 | 78g | 1.5～5g | MF 0.3～0.6／PE 0.2～0.6 | M-Light | Spinning | - | Carbon fiber 94% Glass fiber 6% |
| AATS-62MH/R | 6'2"(1.88m) | 2 | 80g | 1～6g | MF 0.3～0.6／PE 0.2～0.8 | M-Heavy | Spinning | - | Carbon fiber 96% Glass fiber 4% |
| AATS-60MLST/F | 6'0"(1.82m) | 2 | 75g | 0.8～4g | MF 0.25～0.5／PE 0.2～0.4 | M-Light | Spinning | Solid Tip | Carbon fiber 97% Glass fiber 3% |
Variants ARTISAN COMPETITION
Description
AATS-61UL/R
A micro lure special that controls the weight area of zero comma.
In a situation where you are reluctant to eat due to human pressure and weather factors, it is an essential lure to squeeze out fish, micro spoons and micro cranks. Especially in terms of spoons, AATS-61UL/R, an ultra-lightweight lure-specialized model that fits the modern area trout situation, which has become commonplace, let alone under 1g, let alone under 0.5g.
Ultra-light & regular taper design that is slim and super supple, and easy to load even with extremely light weights.
However, it is not soft, but because it uses a high-elastic material from the center to the bat to give it a moderate tension, it is possible to cast sharply without breaking the waist. In addition, the blur after casting quickly converges, realizing the good standing that can be transferred to immediate retrieval operation.
In addition, the tension allows for various winding methods that interweave plus alphas with constant windings, such as orbital changes such as winding up and winding down, flipping the wrist slightly and making the tip bounce, and ultra-small shake winding. It also has high operability.
And when the load is applied, it bends smoothly and entangles the weak bit on it... AATS-61UL/R, an ultra-light that skillfully manipulates the micro lure and pry open the mouth of the reluctant fish, which is extremely light winding.
●Spoon ●Micro spoon ●Micro crank ●Small crank bait etc…
- ■ Blank
[Main materials used]
Medium and low elastic 24-ton carbon material is used for tip-to-center. Although it is a slender regular taper design, the center-bat is mainly made of 30 tons of carbon and 33 tons of carbon with "nano alloy® technology" applied to high-strength and high-elasticity carbon fiber "Treka® "T1100G"", and the bat part is elastic. By reinforcing it with a high-rate 40-ton carbon, it combines suppleness and moderate tension.
From the tip to the original guide, the unpainted unsand finish, and only the bat part is painted. Thread wrapping for decoration is also kept to a minimum, and it is finished with a method that fully demonstrates the original potential of blanks.
▪"Treka®T1100G" & "Nano Alloy® Technology"- ※"Treka®" & "Nano Alloy® Technology" are registered trademarks of Toray Co., Ltd.
■ Blank color
From the original guide to the main logo part, it is colored in clear deep green reminiscent of the combat stick of yesteryear. " Proof of being created under the same spirit as the bass rod combat stick, which has been consistent with "real-life supremacy" and has continued to produce results on the stage of tournaments.
■ Guide system
Based on a small-caliber lightweight titanium frame and torzeit ring guide (excluding the TOP guide), the guide for the center-bat section (#6, the original guide), which has the heaviest weight of the guide, is lightweight and thread winding amount and co Adopting an AT guide that can reduce the amount of ting.
The narrow and flexible blanks are set more severely because the guide weight has a significant impact on rod performance. I have eliminated the dullness as much as possible.
●Top: Titanium Frame SiC Ring KG Guide (T-KGST4)
●Tip to center: Titanium frame tolzeit ring KT guide (T-KTTG 4, 4, 4, 5) + KL guide (T-KLTG6L) + AT guide (T-ATTG10)
●Center to Bat: Titanium Frame Tolzeit Ring AT Guide (T-ATTG16)
■ Joint
The joint part adopts a high-grade spigot joint that touches the surface. The signal transmitted to the tip is transmitted to the hand without loss.
■ Joint thread & part number printing
The power-specific color thread wrapping (UL is red) and the part number printing of the original guide part are a tournament that is also a struggle for time, and you can quickly pick up the desired model from the rod stand without squatting and checking. Actual specifications.- ※The image is AATS-61L/RF.
■ Reel seat design
Original reel sheet made of natural wood and ebony with excellent durability. It has a straight shape that is difficult to feel uncomfortable with various gripping and is easy to fit in anyone's hand, and by setting it to a thinness of 23Φ, it is easy to weak and facilitate fine rod operation.
The flat part is laser engraved with the "Artisan" logo.
※Please note that the reel seat is made of natural wood, so there are individual differences in wood grain, color, and weight.
■ Grip design
Straight grip with excellent weight balance. By adopting a shaped cork, the weight is reduced and the degree of freedom of the wrist is increased, contributing to improved operability.
Artisan's original end plate is attached to the grip end.- ■ Grip length
■ Made in Japan (Made in Japan)
This product is made in Japan.
For information on "Commitment to Made in Japan", please see here (Grand Cobra Product Development Concept).
■"National Fishing Rod Fair Trade Council" certified products
Based on the provisions of the "Fair Competition Agreement on the Display of Fishing Rods" certified by the Director of the Fair Trade Commission and the Consumer Affairs Agency, the "National Fishing Rod Fair Trade Council" certified that it meets its contents and conditions, printed the "Fishing Rod Fairness Mark".
※The image is an image.
AATS-61L/RF
The base of the winding is a high-dimensional fusion of "tension" at low load and "suppleness" at high load.
AATS-61L/RF is a model that is aimed at frequently used winding lures, such as spoons of about 1 to 2g and small to medium-sized crankbaits.
At low load, it is characterized by a crisp and tensional feeling unique to tubular. From the vibration of the lure, the touch of the fish, and the discomfort when garbage is attached to the lure, while increasing the accuracy of winding fishing with sensitivity that clearly conveys the situation in the water at hand, fine rod actions such as shaking and tapping are carried out according to the angler's will. It also demonstrates high operability that can be done.
On the other hand, when a load is applied, it is both flexible to bend in according to the load. Even in coiled fishing with a line stretched, the bite is not played, and after hooking up, the entire rod slowly becomes slurve to reduce the sparing.
A model in the middle of the roll that is indispensable for any field, covering a wide range of all kinds of winding methods that are interwoven with small skills, as well as the winding. That is AATS-61L/RF.
●Spoon ●Crankbait ●Floating Minnow ●Small Bottom Plug ●Small Top Water etc...
- ■ Blank
[Main materials used]
Medium and low elastic 24 tons of carbon is used for tip to bat. For the center to the bat, 33 tons of carbon applied to "Nano Alloy® Technology" to the high-strength and high-elasticity factor carbon fiber "Treka® "T1100G"", and the bat part is reinforced with high-elastic 40 tons of carbon for regular first taper. Design. Both the tension at low load and the followability according to the load.
From the tip to the original guide, the unpainted unsand finish, and only the bat part is painted. Thread wrapping for decoration is also kept to a minimum, and it is finished with a method that fully demonstrates the original potential of blanks.
▪"Treka®T1100G" & "Nano Alloy® Technology"- ※"Treka®" & "Nano Alloy® Technology" are registered trademarks of Toray Co., Ltd.
■ Blank color
From the original guide to the main logo part, it is colored in clear deep green reminiscent of the combat stick of yesteryear. " Proof of being created under the same spirit as the bass rod combat stick, which has been consistent with "real-life supremacy" and has continued to produce results on the stage of tournaments.
■ Guide system
The guide is set to a slightly smaller caliber, and the guide suppresses the rampage of the line due to the rotation of the rotor during the reeling. Because it is wrapped in a spool while suppressing the sagging of the line, it assists the vibration of a small lure to transmit to the palm of your hand. In addition, even with a lure with small pulling resistance, the line is loose and easy to wind, it has a trouble suppression effect and supports comfortable fishing.
All guides use titanium frame SiC ring guides. Since the ring is thicker than Torzaite, by installing a slightly weighty SiC, it adds a slightly moist feeling to the tension of the blanks to suppress the rebound and assists in reducing the re-reduction when using a low-elongation ester line. By adding guide adjustment to blanks with performance that are difficult to break, the performance is further sublimated.
●Top: Titanium Frame SiC Ring KG Guide (T-KGST4)
●Tip to center: Titanium frame SiC ring KT guide (T-KTSG 4, 4, 4, 4.5, 5.5) + KL guide (T-KLSG8M)
●Center - Bat: Titanium Frame SiC Ring KL Guide (T-KLSG16H)
■ Joint
The joint part adopts a high-grade spigot joint that touches the surface. The signal transmitted to the tip is transmitted to the hand without loss.
■ Joint thread & part number printing
The power-specific color thread wrapping (L is green) and the part number printing of the original guide part are a tournament that is also a struggle against time, and you can quickly pick up the model you are looking for from the rod stand without squatting down and checking. Actual specifications.
■ Reel seat design
Original reel sheet made of natural wood and ebony with excellent durability. It has a straight shape that is difficult to feel uncomfortable with various gripping and is easy to fit in anyone's hand, and by setting it to a thinness of 23Φ, it is easy to weak and facilitate fine rod operation.
The flat part is laser engraved with the "Artisan" logo.
※Please note that the reel seat is made of natural wood, so there are individual differences in wood grain, color, and weight.
■ Grip design
Straight grip with excellent weight balance. By adopting a shaped cork, the weight is reduced and the degree of freedom of the wrist is increased, contributing to improved operability.
Artisan's original end plate is attached to the grip end.- ■ Grip length
■ Made in Japan (Made in Japan)
This product is made in Japan.
For information on "Commitment to Made in Japan", please see here (Grand Cobra Product Development Concept).
■"National Fishing Rod Fair Trade Council" certified products
Based on the provisions of the "Fair Competition Agreement on the Display of Fishing Rods" certified by the Director of the Fair Trade Commission and the Consumer Affairs Agency, the "National Fishing Rod Fair Trade Council" certified that it meets its contents and conditions, printed the "Fishing Rod Fairness Mark".
AATS-61ML/S
Wrapped in the muscles, shake rhythmically. An all-round model compatible with medium to heavyweight lures.
A muscle blank that can be rolled up by throwing medium to heavyweight lures such as heavy spoons and full-size cranks.
Thanks to the chewy thick winding & easy-to-squee slow taper design, not only fishing that rolls heavy spoons and full-size cranks powerfully, but once you start swinging the rod, the rod shakes like its rhythm on its own. As possible, it also matches bottom fishing such as vibration and bottom-based minnow shaking.
In addition, because of the slow taper, the entire rod becomes a cushion, and the strong inversion bite is hooked without playing. After hanging, due to the characteristics of the thick roll, the more you bend in, the more tenacious the torque is, and the lifting power is displayed that even large ones can pull in. In tournament scenes with time limits, it is possible to bring them to the landing quickly without spending time on the exchange, so it is a great advantage.
Another base that is paired with the lightweight all-rounder 61L/RF. The medium to heavyweight all-round model is AATS-61ML/S.
●Spoon ●Crankbait ●Vibration ●Bottom Minnow etc...
- ■ Blank
[Main materials used]
Medium and low elastic 24 tons of carbon is used as the main material, and the slow taper and sheet are rolled up thickly in a multilayer, and it is designed to exert power as much as it bends. By reinforcing the bat part with 30 tons of carbon with a high elastic magance, it also had the effect of suppressing the excessive rampage of the blanks after casting.
From the tip to the original guide, the unpainted unsand finish, and only the bat part is painted. Thread wrapping for decoration is also kept to a minimum, and it is finished with a method that fully demonstrates the original potential of blanks.
■ Blank color
From the original guide to the main logo part, it is colored in clear deep green reminiscent of the combat stick of yesteryear. " Proof of being created under the same spirit as the bass rod combat stick, which has been consistent with "real-life supremacy" and has continued to produce results on the stage of tournaments.
■ Guide system
Set a guide with a large caliber that has good thread loss even when using a thick line that corresponds to heavyweight lures. In addition, the titanium frame tolzeit ring with a thin ring thickness and a wide inner diameter assists in smooth thread loss.
●Top: Titanium Frame SiC Ring KG Guide (T-KGST4.5)
●Tip to center: Titanium frame tolzai ring KT guide (T-KTTG 4.5, 4.5, 4.5, 5.5) + KL guide (T-KLTG7L, 10H)
●Center to Bat: Titanium Frame Torzeit Ring KL Guide (T-KLTG20H)
■ Joint
The joint part adopts a high-grade spigot joint that touches the surface. The signal transmitted to the tip is transmitted to the hand without loss.
■ Joint thread & part number printing
The power-specific color thread wrapping (ML is blue) and the part number printing of the original guide part are a tournament that is also a struggle with time, and you can quickly pick up the desired model from the rod stand without squatting and checking. Actual specifications.- ※The image is AATS-61L/RF.
■ Reel seat design
Original reel sheet made of natural wood and ebony with excellent durability. It has a straight shape that is difficult to feel uncomfortable with various gripping and is easy to fit in anyone's hand, and by setting it to a thinness of 23Φ, it is easy to weak and facilitate fine rod operation.
The flat part is laser engraved with the "Artisan" logo.
※Please note that the reel seat is made of natural wood, so there are individual differences in wood grain, color, and weight.
■ Grip design
Straight grip with excellent weight balance. By adopting a shaped cork, the weight is reduced and the degree of freedom of the wrist is increased, contributing to improved operability.
Artisan's original end plate is attached to the grip end.- ■ Grip length
■ Made in Japan (Made in Japan)
This product is made in Japan.
For information on "Commitment to Made in Japan", please see here (Grand Cobra Product Development Concept).
■"National Fishing Rod Fair Trade Council" certified products
Based on the provisions of the "Fair Competition Agreement on the Display of Fishing Rods" certified by the Director of the Fair Trade Commission and the Consumer Affairs Agency, the "National Fishing Rod Fair Trade Council" certified that it meets its contents and conditions, printed the "Fishing Rod Fairness Mark".
AATS-62MH/R
A power shaft that maximizes the potential of the operating system lure.
●Top water ●Floating minnow ●Vibration ●Bottom minnow etc...
- Characteristic
- ■ Blank
[Main materials used]
The tip to the center is composed of 24 tons of medium and low elasticity carbon, and the center to the bat are composed of 30 tons of carbon and high-strength and high-elastic carbon "Treka® M40X" (nano alloy® technology applied). By designing it with a thick diameter and regular taper, it combines not only tension and power, but also flexibility.
From the tip to the original guide, the unpainted unsand finish, and only the bat part is painted. Thread wrapping for decoration is also kept to a minimum, and it is finished with a method that fully demonstrates the original potential of blanks.
▪"Treka®M40X" & "Nano Alloy® Technology"- ※"Treka®" & "Nano Alloy® Technology" are registered trademarks of Toray Co., Ltd.
■ Blank color
From the original guide to the main logo part, it is colored in clear deep green reminiscent of the combat stick of yesteryear. " Proof of being created under the same spirit as the bass rod combat stick, which has been consistent with "real-life supremacy" and has continued to produce results on the stage of tournaments.
■ Guide system
Equipped with a guide with a large caliber overall, and a setting that does not choke to the extreme. Although it is a strong and powerful blank, not only can you fly the lightweight lure as much as possible with the good thread loss, but it is also possible to give the lure a crisp movement by making it easier to produce a line slack.
The tolzeit ring, which has a thin ring thickness and a wide inner diameter, plays a role in creating smooth threading and thread play.
●Top: Titanium Frame SiC Ring KG Guide (T-KGST4.5)
●Tip to center: Titanium frame tolzight ring KT guide (T-KTSG 4.5, 4.5, 4.5) + KL guide (T-KLTG5.5L, 8M, 12H)
●Center to Bat: Titanium Frame Torzeit Ring KL Guide (T-KLTG20H)
■ Joint
The joint part adopts a high-grade spigot joint that touches the surface. The signal transmitted to the tip is transmitted to the hand without loss.
■ Joint thread & part number printing
The power-specific color thread wrapping (MH is purple) and the part number printing of the original guide part are a tournament that is also a struggle with time, and you can quickly pick up the model you want from the rod stand without squatting and checking. Practical specifications.- ※The image is AATS-61L/RF.
■ Reel seat design
Original reel sheet made of natural wood and ebony with excellent durability. It has a straight shape that is difficult to feel uncomfortable with various gripping and is easy to fit in anyone's hand, and by setting it to a thinness of 23Φ, it is easy to weak and facilitate fine rod operation.
The flat part is laser engraved with the "Artisan" logo.
※Please note that the reel seat is made of natural wood, so there are individual differences in wood grain, color, and weight.
■ Grip design
Straight grip with excellent weight balance. By adopting a shaped cork, the weight is reduced and the degree of freedom of the wrist is increased, contributing to improved operability.
Artisan's original end plate is attached to the grip end.- ■ Grip length
■ Made in Japan (Made in Japan)
This product is made in Japan.
For information on "Commitment to Made in Japan", please see here (Grand Cobra Product Development Concept).
■"National Fishing Rod Fair Trade Council" certified products
Based on the provisions of the "Fair Competition Agreement on the Display of Fishing Rods" certified by the Director of the Fair Trade Commission and the Consumer Affairs Agency, the "National Fishing Rod Fair Trade Council" certified that it meets its contents and conditions, printed the "Fishing Rod Fairness Mark".
AATS-60MLST/F
For the delicate winding of the area royal road lure. A solid tip model that supports a wide area for both loading and hanging.
A solid tip model suitable for fishing that wraps area royal lures such as micro spoons of less than 1g to spoons of about 2g, and small to medium-sized cranks, sometimes interweaving small tricks, and winding up in super delicately.
The combination of UL-class delicate solid tip and ML-class taut tubular berry achieves a high-balanced finish without the dulness and weight that is common to solid tips, and while feeling ultra-fine vibration Equipped with high operability that can be rolled while vibrating only the tip of the rod with super delicate vibration, such as ultra-delicate winding and micro-pitch shaking.
In addition, depending on the bite pattern that changes depending on the activity of the fish, it is possible to respond to "on" using the suppleness of the solid, as well as "hanging" with a taut berry and aggressive "hanging" without feeling uncomfortable.
In addition, carbon with the same elastic magant is used for solid tip and tubular berry. Smooth linkage while taking advantage of the individuality of solid and tubular. It demonstrates a refreshing cast feel, a high tracking ability that is difficult to be exposed after hanging fish, and is difficult to break the line even in sudden pull.
AATS-60MLST/F is a solid tip that can be rolled super delicately, can open the mouth with small tricks, and can be used for both loading and hanging.
●Spoon ●Micro spoon ●Crankbait ●Minnow etc...
- ■ Blank
[Main materials used]
The tip is equipped with a medium and low elastic 24-ton carbon solid, and the tubular part of the very center is also composed of the same 24-ton carbon and 30-ton carbon.
The solid tip and tubular berry parts are smoothly linked by using carbon with the same elastic magant. Not only does it overcome problems such as "poor cast feel" and "easy to shake the cast direction" that tend to occur with solid tip rods, but it can also respond to both "on" and "hang" depending on the angle of the rod and line. ( Refer to the illustration below)
The center to the bat is mainly composed of 33 tons of carbon with "nano alloy® technology" applied to the 30 tons and high-strength and high-elasticity carbon fiber "Treka® T1100G", and the bat part is reinforced with 40 tons of carbon with a high modulus of elasticity. While having high operability due to the tension unique to high-elastic materials, it is designed with a slender blanks diameter to follow and reduce raking when the load is applied.
From Berry to the former guide, the unpainted unsand finish, and only the bat part is painted. Thread wrapping for decoration is also kept to a minimum, and it is finished with a method that fully demonstrates the original potential of blanks.
■The angle of the rod and line when "on board"
Before the load is applied to the berry, the tip enters flexibly, so it is tame for the part-time job.
■The angle of the rod and line when "hanging"
The tip does not enter much, and the load is applied to the taut berry, so the needle hangs quickly.
▪"Treka®T1100G" & "Nano Alloy® Technology"- ※"Treka®" & "Nano Alloy® Technology" are registered trademarks of Toray Co., Ltd.
■ Blank color
From the original guide to the main logo part, it is colored in clear deep green reminiscent of the combat stick of yesteryear. " Proof of being created under the same spirit as the bass rod combat stick, which has been consistent with "real-life supremacy" and has continued to produce results on the stage of tournaments.
■ Guide system
Lightweight titanium frame and tolzeit ring guide (excluding TOP guide) is adopted.
By setting the number of a slightly smaller caliber, the rampage and sagging of the line during reeling are suppressed, and even the slight vibration of a small lure is firmly transmitted to the hand. At the same time, it supports comfortable fishing by suppressing trouble even with lures with low pulling resistance, sagging lines and easy to wind.
The guide of the solid part (TOP-#3) wraps the atari, which returns to the tip unique to the solid tip, with a highly visible white thread that is easy to see and feel with the eyes.
●Top: Titanium Frame SiC Ring KG Guide (T-KGST4)
●Tip to center: Titanium frame tolzait ring KT guide (T-KTTG 4, 4, 4, 4.5, 5.5) + KL guide (T-KLTG8M)
●Center to Bat: Titanium Frame Torzit Ring KL Guide (T-KLTG16H)
■ Joint
The joint part adopts a high-grade spigot joint that touches the surface. The signal transmitted to the tip is transmitted to the hand without loss.
■ Joint thread & part number printing
The power-specific color thread wrapping (ML is blue) and the part number printing of the original guide part are a tournament that is also a struggle with time, and you can quickly pick up the desired model from the rod stand without squatting and checking. Actual specifications.- ※The image is AATS-61L/RF.
■ Reel seat design
Original reel sheet made of natural wood and ebony with excellent durability. It has a straight shape that is difficult to feel uncomfortable with various gripping and is easy to fit in anyone's hand, and by setting it to a thinness of 23Φ, it is easy to weak and facilitate fine rod operation.
The flat part is laser engraved with the "Artisan" logo.
※Please note that the reel seat is made of natural wood, so there are individual differences in wood grain, color, and weight.
■ Grip design
Straight grip with excellent weight balance. By adopting a shaped cork, the weight is reduced and the degree of freedom of the wrist is increased, contributing to improved operability.
Artisan's original end plate is attached to the grip end.- ■ Grip length
■ Made in Japan (Made in Japan)
This product is made in Japan.
For information on "Commitment to Made in Japan", please see here (Grand Cobra Product Development Concept).
■"National Fishing Rod Fair Trade Council" certified products
Based on the provisions of the "Fair Competition Agreement on the Display of Fishing Rods" certified by the Director of the Fair Trade Commission and the Consumer Affairs Agency, the "National Fishing Rod Fair Trade Council" certified that it meets its contents and conditions, printed the "Fishing Rod Fairness Mark".
