Spine-x 190f

SPINE-X is a segmented subsurface swimbait equipped with an innovative user-controlled wire-through titanium spinal system to deliver dynamic action. Megabass’ LIVE-WIRED SYSTEM(PAT.P) leverages the shape-memory properties of titanium wire to add layers of customizable control to SPINE-X’s swimming movement. Included with three titanium “spines,” anglers can add multiple wires at a time for tighter “s” swimming and a faster recovery rate between segmented joints. By changing the number of titanium wires, anglers can adjust the suppleness and tension of SPINE-X to perfectly match angler input and target preferences. This not only enables situation-specific tuning but adds a dynamic element of internal tension to the swimbait’s movement, contributing to its lifelike appeal.

Developed to target those exceedingly discerning trophy predators, SPINE-X swims with sinuous flash and sends twitches and jerks shuddering from tip to tail with unsurpassed realism.

LIVE-WIRED SYSTEM(PAT.P)

A breakthrough tuning system that harnesses titanium wires to add spinal tension to the movement of segmented lures. Connecting each joint with titanium’s shape memory properties adds an additional layer of tension and joint recovery to the lure’s swimming motion, resulting in compelling realism. Wires can be added or subtracted to fine-tune the swimming motion to the situation, enabling precise alignment to predatory tastes.

SPINE-X ORIGINAL TAIL

The tail of the SPINE-X is made of elastomer material carefully formulated for supple swimming performance. Designed to facilitate retrieve speeds from dead-slow to extra-fast, the tail dynamically flexes to keep SPINE-X swimming with tight appeal, exhibiting a lifelike action reminiscent of hasu and ugui.

What to do in case of deformation:
(1) Use tongs to submerge in hot water at 90°C to 100°C for 30 seconds to 1 minute, being careful not to let the tail touch the sides of the pot.
(2) Take it out of the water and carefully straighten the tail further if required and let it cool it on a flat surface for 2 to 3 minutes.
※When storing SPINE-X, remove the tail from the body and store it safely so it does not get bent.